Orthopedic devices for penis enlargement have been used by men for more than a decade and have proven to be positive. The most used device is called extender, which is translated from English as expander or filler. This fully reflects its purpose. It is characterized by the simplicity of design and assembly, which allows men to use both a purchased (factory) extender and at home. It's pretty easy to do. The main thing is to have the necessary materials and basic knowledge about the mechanics of the intimate apparatus.
Types and effect of expanders
The device works on the principle of spreading the cavernous bodies. This happens under conditions of regular tissue tension due to the periodic disintegration of axes in the direction of increasing length. The growth of new tissue does not stop;
Average growth rates, according to user and manufacturer reviews, are an increase in length of 2-5 centimeters over a period of 6 to 10 months. You should not expect immediate results. It will take patience and regular use of the extender. Violation of this recommendation will result in failure to achieve the desired effect.
Depending on the connection method, extenders are divided into several types. When planning to assemble a version at home, you need to understand how they differ from each other.
Vacuum expander
The enclosure is carried out using a special vacuum chamber. It covers the head of the penis by about 3-7 centimeters. It is considered more reliable and safe. The risk of injury is practically reduced to zero, as there is no risk of compression.
Extender for penis enlargement
Loop and strap extender
The mechanics of the clasp are almost the same, but the shape of the clasp is different. In the first case, a loop is used, and in the second, a strap is used. The difference gives these species an important difference.
The belt is lined with gauze, so the degree of compression is minimal. The loop, on the contrary, can strongly compress the head, cutting off the blood supply to the reproductive organ, but remains the most common option.
How to make an extender with your own hands at home?
You can make any of the three types of apparatus listed. The most difficult to manufacture will be the vacuum one due to the fact that you will need to make a chamber. Otherwise, the process will not have any significant changes.
Drawings
Make a schematic diagram of the device yourself. To make a drawing, it is enough to study the model from any known manufacturer. Based on a photograph, drawing, video, they sketch their outline. The length of the side posts is chosen based on the desired result. It can vary from 20 to 25 centimeters.
Necessary materials and tools
A home-made extender at home is assembled from the same parts as the factory one. Specific materials depend on the type of structure being assembled:
- The stop ring, straps and loops are in direct contact with the skin and should not cause an allergic reaction. This imposes certain requirements on the material. The ring can be made of thick cardboard, plastic/hypoallergenic plastic without sharp corners. Its inner diameter should be 2-3 mm larger than the cross-sectional width of the penis. It is best to use a sterile bandage before use, which is changed each time.
- Slats (side bars) are chosen so that they can adjust the required length for a long time. These can be bars, rods, chrome spokes.
- The vacuum chamber and the bulb must be sealed. If this condition is not met, then such a homemade product will not work.
The difference between the devices lies in the fastening element. If you decide to make a variety with a camera, you should give preference not to a plastic bottle as written in some sources, but to buy a special jar. These are sold in pharmacies. This guarantees the creation of an internal vacuum.
Homemade schematic expander
Step by step assembly instructions
The production of a belt or loop device involves performing the following sequence of work:
- A piece with a diameter of 11 cm is cut from a piece of plywood or another material with a thickness of not more than 10 mm.
- The length of the rods is 20-30 cm. They are completely screwed into the plywood, leaving a little on top. The entrances are filled with glue.
- They screw a "lamb" on each.
- Strips are cut from a thin metal plate and holes are made in them.
- A clamp made of soft tubes or a belt is inserted into the holes, which can be used as wide medical tunics.
- Check the reliability of the fastening.
The assembly of the vacuum variety differs only in that a pear jar is attached to the bottom. Not everyone has such a device at home, but it is freely sold in pharmacies in the city. The radius varies from 13 to 25 mm. It is selected according to the size of the reproductive organ. The tightness of the clamp is ensured by a rubber sleeve. Its length should be at least 6 cm. It can be made from elastic surgical gloves.
The air will be pumped thanks to a lamp or a connector with a hose. You can use the tonometer element. The shut-off valve is removed from it and inserted from the other end. This allows you to change the principle of operation. The pear will begin to pump instead of pumping air. As you can see, you will need to tinker more than with a strap and loop device.
To help you understand the principle of assembling an extender with your own hands at home, a video will help you, which clearly shows how the elements are connected, as well as what materials they are made of.
Penis enlargement extender - attached below the knee
How and when to use?
The indicator for the use of the device is the small size of the device (10-12 cm). This length is not a "reference" length. A man decides for himself if he is satisfied with his reproductive organ or if he wants to have more. To increase the size of the phallus, you need to wear a home-made or factory-made device for at least 4-6 hours a day. The design allows you to hide the extender under clothing. People around you won't notice anything.
Instructions for using the stretcher:
- The circle is placed on a slightly erect penis. The ring should fit snugly against the pubic bone.
- The foreskin is pulled back and a camera, loop or strap is secured to the glans. It is necessary to ensure that blood circulation is not interrupted (no excessive pressure, changes in the shade of the cover).
- Adjust the length of the rods. There should be no painful sensations. The parameter increases gradually, allowing the organ to get used to the degree of tension, that is, the training of the phallus.
When possible, massage the penis every hour. This allows him to quickly adapt to the loads. After the specified time, the device is removed and the meat is mixed using special intimate creams. The device is thoroughly disinfected each time and placed in clean packaging for storage.
Advantages and disadvantages of homemade structures
The advantages of the stretcher at home include the following parameters:
- the opportunity to try the stretcher without buying a device;
- relative freedom;
- taking a design that fully corresponds to the parameters of the phallus.
There are actually very few advantages. There are more disadvantages. These include the inconvenience of the product, since it is quite difficult to independently assemble a model that will ideally be rotated, placed, removed and not pressed anywhere and not slip.
Which extender is better - factory or home?
To answer this question, it is enough to compare the two types of models:
- A homemade product weighs much more than factory models. This leads to the need to adjust the rods every time for a long time so that they do not press the head of the penis. Another point is that it is quite difficult to make a vacuum model. By the way, it is usually less effective than those made at home with a loop and strap.
- Cost, which was mentioned as an advantage, is a relative advantage. Today there are Chinese models, which cost 1-3 thousand rubles. This is no more expensive than a homemade extender. No one will sell half a meter of hair ribbons or 20 centimeters of textolite. You will have to buy a lot more materials that will sit idle. This makes assembling the device with your own hands profitable only when you already have everything you need.
- The simplified design of a self-assembled device is not an advantage, but a disadvantage, as it will be inconvenient to use. You have to spend a lot of time to put on and take off, and considering the fact that self-massage is recommended periodically, it is also less effective.
A conclusion can be drawn - factory equipment is better. To try this method of penis enlargement, you can simply buy a cheap model
What risks can there be when using a home appliance?
Experts and experts do not recommend assembling an extension cord yourself without the appropriate skills. If the device turns out to be "clumsy", presses, presses, causes discomfort, wearing it is not highly recommended. This can lead to unpleasant consequences.
Homemade extender
A well-assembled device will not be inferior in efficiency to a factory one. It will just be aesthetically unappealing. Otherwise there will be no difference, but here too there is a nuance. Many users write that with prolonged use, hematomas, compressions and irritations form on the dermis.
This can be caused by low quality materials. Finding medical silicone in a pharmacy is almost impossible. If one is sold, its properties leave something to be desired and with prolonged contact, negative consequences begin to appear.